Chuck:
Attached are the first few photographs of the Adirondack Guideboat--Stripper I am attempting to manufacture. Feel free to edit the following as you wish.  

Strongback (upside down) with the last rib-station penciled in.	Strip starting.
Strip continuing.
Stripping completed.	Staples and screws removed.
First layer of epoxy and fiberglass on the hull.	Trimmed and removed from strongback.
Interior sanding.	Fiberglass laid in.
Interior after addition of epoxy.	Interior with seat mounts and inboard gunnel work.

More photo's to come as work progresses.

Thanks