by Robbie Powick
Part 1 - Part
2 - Part 4
- Part 5
Its been awhile so thought I had better send an update on progress on my Navigator....
I have been busy cutting out all the frames and sanding them to matched pairs....finished that so cut out the spaces on each frame...each frame has received 2 coats of Sealer/Preservative and will shortly have a 3rd and final coat...
I have just got some Epoxy glue so will glue the bottom panel scarf joint so that I can mark and cutout that panel.....
Will shortly get the hard wood needed for stringers etc and then progress will be faster towards a real boat shape.
That's all for now,